Suzhou bend pipe manufacturer informs you of the standards and regulations for bend pipe processing

In today's rapidly developing regulatory industry, whether in our daily life or work, the presence of bent pipes can be seen in many places. They are widely used in fields such as electricity, petroleum, navigation, and chemical engineering, mainly for oil, gas, and liquid transportation. They play a significant role in aircraft and their engines. In such an important usage situation, the standards and regulations during the bending process are very important. Below, Zhijiu will explain to you the standards and regulations for bending pipe processing.

1、 All bent pipes must be processed in accordance with relevant standards and regulations (the bends must be horizontal and vertical, and the span and spacing must meet the requirements of the specifications). No matter what height the bent pipe is processed to, unstable conditions are not allowed.

2、 The material used for bending processing must be inspected and qualified, and bent pipe racks, connectors, and fasteners with defects such as deformation and cracks are strictly prohibited from use. The fasteners and connectors of bent pipes must not be repaired by welding.

3、 The foundation ground of the bent pipe must be flat, compacted, and hard, and its metal substrate must be flat without any deformation. When the ground is relatively soft, sweeping rods or pads must be used to increase the stress surface and stability.

4、 The springboard on the bent pipe must be laid neatly, with consistent width and length (except for special parts). The springboard on any bent pipe must be firmly fixed, and there must be no large holes on the platform surface (except for special parts).

The above content is the standards and regulations for bending pipe processing. We hope that after reading the above content, it can be helpful to you in your future processing. If you want to learn more about related content, please feel free to contact us at any time!